2026-08-11

胎压监测系统(传感器 ID 驱动学习)

校正代码 34041150 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See 人员保护 to make sure wearing proper PPE when performing the below procedure. NOTE: See 人体工程学注意事项 for safe and healthy working practices.

  • 2024 年 3 月 11 日:从程序中删除了 Toolbox 例行程序,并添加了有关马牌 (Continental) 系统的额外说明。

程序

  1. 仅适用于马牌 (Continental) 系统:驱动导轨关闭超过 20 分钟后,才会启动自动学习。如果驱动导轨关闭后又因打开车门等开启,则自动学习无法启动,因为驱动导轨关闭时间未超过 20 分钟。此情况下,重置 VCFRONT,TPMS ECU 就会再次触发自动学习。重置 VCFRONT/TPMS ECU:在触摸屏上,点击Low Voltage > Power Distribution > Reset VCFRONT。
  2. 试驾车辆,在 1-3 分钟内达到 15 mph (24 kph) 或更高车速,以便重新连接 TPMS 传感器。
  3. 在车辆触摸屏上确认全部 4 个胎压监测系统 (TPMS) 传感器均提供胎压读数。