2026-08-09
车底中部底板(改装)(电池已拆下)
校正代码 16100007 0.18 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See 人员保护 to make sure wearing proper PPE when performing the below procedure. NOTE: See 人体工程学注意事项 for safe and healthy working practices.
设备:
- 1597715-00-A - 缝隙填充剂
注
This procedure is to be performed if the
HV battery has been removed and components must be reworked or swapped between old and new
HV batteries. Add this correction code as a separate activity.
注
在拆卸高压电池时,如果车底中部底板前角密封剂缺失,则需要执行本程序。
程序
-
在车底中部底板受损区域粘贴遮蔽胶带。
- 使用异丙醇湿巾清洁车底中部底板表面,然后等待风干 1 分钟。
-
在车底中部底板受损区域涂敷 25 厘米(10 英寸)密封剂。
-
佩戴丁腈手套,将密封剂抹平。
注确保密封剂连续不间断。
- 揭下车底中部底板上的遮蔽胶带。
-
等待缝隙填充剂风干至少 30 分钟。
注有关密封剂操作时间和完全固化所需时间,请参阅密封剂胶管上的说明。