2026-08-09
摄像头 - 后向（拆卸和更换）
校正代码
17250102 0.12
NOTE: Unless otherwise explicitly
stated in the procedure, the correction code and its associated FRT reflect all of the
work required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created.
NOTE: See 人员保护 to make sure wearing proper PPE when
performing the below procedure. NOTE: See 人体工程学注意事项 for safe and healthy working
practices.
程序
警告
Whenever a camera has been moved out
of its original position (for example, a camera or windshield replacement), camera
calibration data must be cleared using the vehicle touchscreen: Controls > Service > Camera Calibration >
Clear
Calibration.
- 后置摄像头不能作为单独零件订购。如果需要更换，请同时更换后备箱外部释放开关和后置摄像头总成。请参阅开关和摄像头总成 - 外部释放 - 后备箱（拆卸和更换）。