Model Y Service Manual
Torque Calculator
气囊和辅助约束系统 (SRS) 部件更换原则
气囊或座椅安全带预紧装置一旦展开，必须更换气囊和座椅安全带的部分组件，并检查其他组件是否损坏。如需必检和必换项目列表，请参考
。
父主题：
最佳实践
Crowsfoot or Offset Wrench Extension Calculator
Change to Metric
Torque Calculator Values
T1 (Original torque spec)
L (Distance from center of wrench grip to center of square drive tang)
E (Horizontal distance from center of square drive tang to center of fastener)
Note
If the angle from the extension to the torque wrench is greater than 90° (Figure 2), input E as a positive number.
If the angle from the extension to the torque wrench is less than 90° (Figure 3), input E as a negative number.
If the angle from the extension to the torque wrench is exactly 90°, this calculator is not needed. Torque the fastener to T1.
T2 (Final torque setting)
Figure 1
Figure 2
Figure 3