01/03/2023 00:47:11

地毯 - 第二排(七座)(拆卸和更换)

校正代码 15303212 1.02 注意:除非本程序中另有明确规定,否则上述校正代码和 FRT 反映的是执行本程序(包括关联程序)所需的所有工作。除非明确要求,否则请勿堆叠校正代码。注意:请参阅平均维修工时,深入了解 FRT 及其创建方式。要提供有关 FRT 值的反馈,请发送电子邮件至LaborTimeFeedback@tesla.com注意:请参阅人员保护,确保在执行以下程序时穿戴适当的个人防护装备 (PPE)。

拆卸

  1. Open all the doors and lower all the windows.
  2. Remove the LH and RH front seats from the vehicle. See 座椅总成 - 第一排 - LH(拆卸和更换).
  3. Remove the center console from the vehicle. See 中控台(拆卸和安装).
  4. Release the clips (x4) that attach the LH upper B-pillar trim assembly to the B-pillar, and then move the trim aside.
    提示: Pull the bottom of the upper B-pillar trim toward the inside of the vehicle, and then pull the top to release the remaining clips.
  5. Remove the LH lower C-pillar trim. See 饰板 - C 柱 - 下 - LH(七座)(拆卸和更换).
  6. Remove the LH lower B-pillar trim. See 饰板 - B 柱 - 下 - LH(非结构化电池组) (拆卸和更换).
  7. Repeat step 4 through step 6 for the RH side of the vehicle.
  8. Move the 2nd row seats fully rearward.
  9. Remove the 2nd row floormat.
  10. Remove the RH 2nd row seat seat track cover. See 盖板 - 座椅滑轨 - 第二排座椅 - RH(七座)(拆卸和更换).
  11. Remove the center 2nd row seat seat track cover. See 盖板 - 座椅滑轨 - 第二排座椅 - 中间(七座)(拆卸和更换).
  12. Remove the LH 2nd row seat seat track cover. 盖板 - 座椅滑轨 - 第二排座椅 - LH(七座)(拆卸和更换).
  13. Pull the 2nd row carpet towards the front of the vehicle to release it from the RH 2nd row seat.
  14. Pull the 2nd row carpet towards the front of the vehicle to release it from the LH 2nd row seat.
  15. Pull up at the rear of the 2nd row carpet, slide the carpet rearward to release it, and then remove the carpet from the vehicle.

安装

  1. Position the 2nd row carpet to the floorboard, and then slide the carpet forward.
    Informational PurposesAn informational icon, calling your attention
    Make sure the carpet tucks beneath the front main carpet and air duct.
  2. Install the 2nd row carpet into the RH 2nd row seat.
  3. Install the 2nd row carpet into the LH 2nd row seat, and then secure the Velcro strap.
  4. Remove the LH 2nd row seat seat track cover. 盖板 - 座椅滑轨 - 第二排座椅 - LH(七座)(拆卸和更换).
  5. Remove the center 2nd row seat seat track cover. See 盖板 - 座椅滑轨 - 第二排座椅 - 中间(七座)(拆卸和更换).
  6. Remove the RH 2nd row seat seat track cover. See 盖板 - 座椅滑轨 - 第二排座椅 - RH(七座)(拆卸和更换).
  7. Install the rear floormat.
  8. Install the LH lower B-pillar trim. See 饰板 - B 柱 - 下 - LH(非结构化电池组) (拆卸和更换).
  9. Install the LH lower C-pillar trim. See 饰板 - C 柱 - 下 - LH(七座)(拆卸和更换).
  10. Insert the top of the LH upper B-pillar trim under the headliner to align the clips, and then press the bottom to fully seat the lower portion of the trim.
    Informational PurposesAn informational icon, calling your attention
    Ensure the seal correctly overlaps the trim.
  11. Repeat step 8 through step 10 for the RH side of the vehicle.
  12. Install the center console into the vehicle but do not install the rear underhood apron yet . See 中控台(拆卸和安装).
  13. Install the LH and RH front seats into the vehicle. See 座椅总成 - 第一排 - LH(拆卸和更换).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    警告
    Do not reconnect 12V/LV power until both seats are installed.
  14. Raise all the windows and close all the doors.