27/06/2024 19:24:05
前照灯(SAE 标准至全球版) - 前照灯总成 - 成对(改装)
校正代码 17400106 0.66 注意:除非本程序中另有明确规定,否则上述校正代码和 FRT 反映的是执行本程序(包括关联程序)所需的所有工作。除非明确要求,否则请勿堆叠校正代码。注意:请参阅平均维修工时,深入了解 FRT 及其创建方式。要提供有关 FRT 值的反馈,请发送电子邮件至LaborTimeFeedback@tesla.com。注意:请参阅人员保护,确保在执行以下程序时穿戴适当的个人防护装备 (PPE)。
警告
本程序为“草案”。虽已通过验证,但可能仍有“警告”和“小心”事项缺失。请遵守安全要求,处理或靠近高压系统和部件时,请谨慎操作。请将校正修理内容及反馈发送至ServiceDevelopment@teslamotors.com。
- 2024-06-27: Updated Toolbox 3 headlamps configuration "Global" direction.
注
Refer to TN-24-17-002 for additional headlamp retrofit information.
- Open the LH front door.
- Lower the LH front window.
-
Connect the vehicle to WiFi or Tesla Service WiFi if available.
注Maintain the WiFi connection for profile functions and firmware download.
- Remove the LH and RH headlights. See 前照灯 - LH(拆卸和更换).
-
Install the new LH and RH headlights. See 前照灯 - LH(拆卸和更换).
注Do not adjust the headlights at this time. Headlight adjustment will be performed later in this procedure.
- Connect a laptop with Toolbox 3 to the vehicle. See Toolbox 3(连接和断开).
-
In Toolbox 3, click on the Dashboards tab, search for “infotainment”, click , and then change the "headlamps" configuration to "GLOBAL".
注If you do not see this configuration displayed, update the vehicle to software version 2024.20 or later.
- On the vehicle touchscreen, perform a software reinstall concurrently with the rest of the steps in this procedure. See 软件重新安装 - 触摸屏.
- Adjust the headlights. See 前照灯 - 调节 - 全球(工具法).
- Disable Service Mode through the touchscreen. See 维护模式.
- Raise the LH front window.
- Close the LH front door.