01/03/2023 00:47:09

线束 - 靠背 - 第二排座椅 - RH（七座）（拆卸和更换）

校正代码 17100142 0.18 注意：除非本程序中另有明确规定，否则上述校正代码和 FRT 反映的是执行本程序（包括关联程序）所需的所有工作。除非明确要求，否则请勿堆叠校正代码。注意：请参阅平均维修工时，深入了解 FRT 及其创建方式。要提供有关 FRT 值的反馈，请发送电子邮件至LaborTimeFeedback@tesla.com。注意：请参阅人员保护，确保在执行以下程序时穿戴适当的个人防护装备 (PPE)。

拆卸

  1. Open the RH doors and lower the RH windows.
  2. Move the RH front seat fully forward.
  3. Fold the RH 2nd row seat to the down position.
  4. Use the towel bar to move the RH 2nd row seat forward.
  5. Remove the RH 2nd row seat back panel. See 背板 - 第二排座椅 - RH（拆卸和更换）.
  6. Remove the RH 2nd row seat shoulder switch. See 肩部开关 - 座椅靠背 - 第二排 - LH（拆卸和更换）.
  7. Remove the RH 2nd row toe kick cover. See 盖板 - 脚踢 - 第二排座椅 - RH（七座）（拆卸和更换）.
  8. Release the clips (x2) that attach the RH 2nd row seat backrest harness to the bottom side of the seat frame, disconnect the connector, and then remove the seat harness from the seat assembly.
    Informational PurposesAn informational icon, calling your attention
    注
    Remove the elastic harness holder to the release harness.
  9. Disconnect the RH 2nd row seat heater connector.
  10. Release the clip that attaches the RH 2nd row seat heater connector to the seat assembly.
  11. Release the fir tree clips (x2), and then release the shoulder switch harness from the harness guides (x5) on the upholstery support.
  12. Use a pry tool to release the shoulder switch connection from between the seatback and seat frame, and then remove the harness from the seat assembly.

安装

  1. Use a pry tool to insert the shoulder switch connection between the seatback and seat frame, and then route the harness onto the seat assembly.
  2. Secure the fir tree clips (x2), and then secure the shoulder switch harness to the harness guides (x5) on the upholstery support.
  3. Install the clip that attaches the RH 2nd row seat heater connector to the seat assembly.
  4. Connect the RH 2nd row seat heater connector.
  5. Secure the clips (x2) that attach the RH 2nd row seat backrest harness to the bottom side of the seat frame, and then connect the connector.
    Informational PurposesAn informational icon, calling your attention
    注
    Install the plastic harness retainer.
  6. Install the RH 2nd row toe kick cover. See 盖板 - 脚踢 - 第二排座椅 - RH（七座）（拆卸和更换）.
  7. Install the RH 2nd row seat shoulder switch. See 肩部开关 - 座椅靠背 - 第二排 - LH（拆卸和更换）.
  8. Install the RH 2nd row seat back panel. See 背板 - 第二排座椅 - RH（拆卸和更换）.
  9. Fold the RH 2nd row seat to the up position.
  10. Move the RH front seat to the original position.
  11. Raise the RH windows and close the RH doors.