Wheel Speed Sensor And Accelerometer 1 (Model YL) (Remove and Replace)

Correction code 20200100002 FRT 0.24 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Torque Specifications

Table 1. Torque Specifications: Wheel Speed Sensor And Accelerometer 1 (Model YL) (Remove and Replace) / Wheel Speed Sensor And Accelerometer 2 (Model YL) (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the LH front/rear wheel speed sensor and accelerometer 1/2 to the knuckle	5 Nm (3.7 lbs-ft)	Torx T30 socket	Reuse