2026-11-04

HVAC Blower Motor - Cabin HVAC (Remove and Replace)

Correction code 1810011102 FRT 3.42 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Install

  1. Install the HVAC blower motor. See HVAC Blower Motor - Cabin HVAC (Remove and Install).
  2. Locally connect a laptop with Toolbox 3 to the vehicle. See Toolbox (Connect and Disconnect).
  3. On the touchscreen, tap the Service Mode "wrench" (at the bottom of the touchscreen UI), and then tap Thermal > Actions > Test HVAC Performance + Blower Identification > Run, and allow the routine to complete.
  4. Disconnect the laptop.
  5. Exit Service Mode Plus. See Service Mode Plus.
  6. Raise all the windows and close all the doors.