Armrest Assembly - 2nd Row Seat - LH (Model YL) (Remove and Replace)
Correction code
13080202702
FRT
0.30
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
- 2026-04-09: Released new procedure.
Torque Specifications
| Description | Torque Value | Recommended Tools | Reuse/Replace | Notes |
|---|---|---|---|---|
| Bolts (x4) that attach the armrest assembly to the LH 2nd row seat |
![]() 20 Nm (14.7 lbs-ft) |
|
Reuse |
Remove
- Remove the LH 2nd row armrest assembly. See Armrest Assembly - 2nd Row Seat - LH (Model YL) (Remove and Install).
Replace
- Install the LH 2nd row armrest assembly. See Armrest Assembly - 2nd Row Seat - LH (Model YL) (Remove and Install).
- Unlock the gateway. See Gateway (Unlock).
- Perform the following routine using Service Mode or Toolbox (see 0005 - Service Modes): PROC_VCSEAT2L_R2-SEAT-CALIBRATIONvia Service Mode:Low Voltage ➜ Seats ➜ Track & Armrest Calibrationvia Toolbox:(link)
- Exit Service Mode. See Service Mode.
