Cap - Coolant Reservoir (Remove and Replace)
Correction code
1840010152
FRT
0.06
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and FRT
listed above reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times
to learn more about FRTs and how they are created.
NOTE: See Personal Protection
to make sure you are wearing proper PPE when performing the procedure
below.
NOTE:
See Ergonomic Precautions for
safe and healthy working practices.
Remove
- Remove the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).
-
Remove the coolant bottle
cap from the coolant bottle assembly.
CAUTIONWear appropriate personal protective equipment (PPE) when performing this operation.
Install
-
Install the coolant bottle
cap to the coolant bottle assembly.
- Install the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).