Blower - Backrest - Front Seat - LH (Remove and Replace)
Correction code
1301011012
FRT
0.18
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and FRT
listed above reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times
to learn more about FRTs and how they are created.
NOTE: See Personal Protection
to make sure you are wearing proper PPE when performing the procedure
below.
NOTE:
See Ergonomic Precautions for
safe and healthy working practices.
Remove
- Remove the driver seat back shell. See Shell - Seat Back - Front Seat - LH (Remove and Replace).
-
Disconnect the electrical connector from the driver seat cushion
ventilation fan.
-
Rotate the fan to remove the
backrest ventilation fan.
Install
-
Rotate the fan counterclockwise to install the backrest ventilation
fan.
-
Connect the electrical connector to the driver seat cushion ventilation
fan.
- Install the driver seat back shell. See Shell - Seat Back - Front Seat - LH (Remove and Replace).