2025-11-18
Seal - Frunk (Remove and Replace)
Correction code
1224057012
FRT
0.06
NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are created.
NOTE: See Personal Protection to make sure you
are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy working practices.
Remove
- Open the hood.
-
Remove the frunk seal from the edge of the frunk.
NotePull the seal upward and work way around to remove.
Install
-
Install the frunk seal to the edge of the frunk.
NotePlace the line on the seal opposite the frunk hood latch and work way around to install.
- Close the hood.