2025-05-30

TPMS Sensor - ID Learn - Continental (Drive Learn)

Correction Code 34041150

Procedure

  1. For Continental systems only: Auto-learn will only start after the drive rail was off for more than 20 minutes. In case you cycled the drive rail, for example to open the gate, auto-learn will not start because the drive rail was not off for more than 20 minutes. In this case, reset the TPMS module to trigger the auto-learn again. To reset TPMS module, perform the following routine using Service Mode or Toolbox (see TEST-RESET_ECUvia Toolbox: (link)via Service Mode Plus: Chassis ➜ TPMS ➜ Start Drive Learn
  2. Test drive the vehicle to at least 15 mph (24 kph) for 1-3 minutes to reconnect the TPMS sensors.
  3. Confirm on the vehicle touchscreen that all 4 TPMS sensors are providing tire pressure readings.