02/03/2020 13:50:14

Pump - Windshield Washer Reservoir (Remove and Replace)

Correction Code 17501002

Removal

  1. Remove the front LH upper wheel arch liner (refer to procedure).
  2. Position a container to collect any spillage.
  3. Disconnect the washer pump connector.
  4. Release the washer tube from the pump and drain any fluid from the reservoir.
    Informational PurposesAn informational icon, calling your attention
    Note
    Place suitable absorbent material around the affected area to absorb any possible fluid spillage.
  5. Remove the pump from the washer reservoir.
    Informational PurposesAn informational icon, calling your attention
    Note
    Inspect the O-ring for damage and replace if necessary.

Installation

  1. Installation procedure is the reverse of removal.