08/12/2022 07:58:30

Module - Sunroof Controller (RHD) (Remove and Replace)

Correction Code 17151902

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
If the 12V power supply is disconnected, do not attempt to open any doors with door glass in closed position. Failure to follow this instruction could result in door glass shatter.
Informational PurposesAn informational icon, calling your attention
Note
Before disconnecting the 12V power supply, ensure that the driver’s door window is fully open. Failure to follow this instruction could result in vehicle lockout.

Removal

  1. Move the LH seat to its rearmost position.
  2. Remove the LH footwell cover (refer to procedure).
  3. Carefully peel back the front LH carpet for access.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Take care not to damage component(s).
  4. Remove the bolts (x3) that secure the LH footwell harness cover (torque 4 Nm).
  5. Disconnect 12V power. See Disconnect 12V Power .
  6. Remove the bolts (x3) that attach the controller to the bulkhead (torque 4 Nm).
  7. Disconnect the sunroof controller harness connectors (x2).
  8. Remove the controller from the vehicle.