23/01/2023 10:30:14

Premium Boost Amplifier (RHD) (Remove and Replace)

Correction Code 21213512

Removal

  1. Remove HEPA filter outlet duct. See (refer to procedure).
  2. Disconnect 12V power. See (refer to procedure).
  3. Remove the accelerator pedal. See (refer to procedure).
  4. Remove the screws (x2) that attach the OBDII connector to the tuner bracket, and then remove the connector from the bracket.
  5. Disconnect the electrical harness from the premium amplifier connector.
  6. Remove steering column. See (refer to procedure).
  7. Remove brake pedal. See (refer to procedure).
  8. Release the clips (x2) that attach the main electrical harness to the bulkhead, and move the harness away from the tuner.
  9. Release the edge clip that attaches the front electrical harness to the body, and move the harness away from the tuner.
  10. Remove the bolts (x3) that attach the amplifier/tuner bracket assembly to the cross car beam.
  11. Disconnect the electrical harness from the tuner connectors.
  12. Release the fir tree clip that attaches the electrical harness to the cross car beam, and then move the electrical harness to the side.
  13. Move the amplifier/tuner bracket assembly out through the bottom of the IP carrier, and then remove the assembly from the vehicle.
    Tip: Rotate the bracket assembly to different angles to ease removal.
  14. Remove the screws (x4) that attach the amplifier to the amplifier/tuner bracket, and then remove the amplifier from the bracket.

Installation

  1. Install the amplifier onto the amplifier/tuner bracket, and then install the screws (x4) that attach the amplifier to the bracket (torque 4 Nm).
  2. Move the amplifier/tuner bracket assembly up through the bottom of the IP carrier.
    Tip: TIP Rotate the bracket assembly to different angles to ease installation.
  3. Bring the electrical harness to the tuner, and then fasten the fir tree clip that attaches the electrical harness to the cross car beam.
  4. Connect the electrical harness to the tuner connectors.
  5. Install the bolts (x3) that attach the amplifier/tuner bracket assembly to the cross car beam (torque 6 Nm).
  6. Move the front electrical harness to the tuner, and fasten the edge clip that attaches the electrical harness to the body.
  7. Move the main electrical harness to the tuner, and fasten the clips (x2) that attach the electrical harness to the bulkhead.
  8. Install the brake pedal. See (refer to procedure).
  9. Install the steering column. See (refer to procedure).
  10. Connect the electrical harness to the premium amplifier connector.
  11. Install the OBDII connector to the tuner bracket, and then install the screws (x2) that attach the connector to the bracket (torque 4 Nm).
  12. Install the accelerator pedal. See (refer to procedure).
  13. Connect 12V power. See (refer to procedure).
  14. Install the HEPA filter outlet duct. See (refer to procedure).
  15. Reinstall the latest vehicle firmware, or update the firmware if not the latest. See Firmware Reinstall - Touchscreen or Firmware Update.