02/03/2020 13:50:14

Shield - Dust - Brake - Rear - LH (Remove and Replace)

Correction Code 33011802

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
If the vehicle has air suspension, activate "Jack" mode on the touchscreen before raising and supporting the vehicle.

Removal

  1. Remove the rear hub (refer to procedure).
  2. Remove the screws (x3) that secure the rear brake dust shield to the knuckle (torque 8 Nm).
  3. Remove the rear brake dust shield.

Installation

Installation procedure is the reverse of removal.
Informational PurposesAn informational icon, calling your attention
Note
Clean the affected areas before installation.