02/03/2020 13:50:14

Antenna - Satellite Radio - Liftgate-Mounted (Remove and Replace)

Correction Code 21310102

Informational PurposesAn informational icon, calling your attention
Note
This procedure is for vehicles built before December 23, 2014. On newer vehicles, the satellite radio antenna is located under the panoramic roof fixed glass (refer to procedure).

Removal

  1. Remove the liftgate glass (refer to procedure).
  2. Disconnect the XM antenna connector.
  3. Release the XM antenna from the adhesive bond.
  4. Release the wiring harness from the liftgate.
    Informational PurposesAn informational icon, calling your attention
    Note
    Note installed position of components before removal.
  5. Remove the XM antenna.

Installation

  1. Installation procedure is the reverse of removal.
    Informational PurposesAn informational icon, calling your attention
    Note
    Clean the affected areas before installation.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Apply contact adhesive to mating faces if bond has been broken.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    Only use cleaning agents and solvents in a well-ventilated area.