02/03/2020 13:50:14

Brake Pedal (Remove and Replace)

Correction Code 33251002

Removal

  1. Remove the brake light switch (refer to procedure).
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    The brake light switch is a one time use component. Ensure that a new switch is used during reinstallation.
  2. Remove the spring clip from the clevis pin.
  3. Depress the brake pedal for clearance and remove the clevis pin.
  4. Remove the nuts (x4) that secure the pedal to the brake booster assembly (torque 23 Nm).
  5. Remove the bolts (x2) that secure the brake pedal assembly to the brake pedal reinforcement panel (torque 23 Nm). Remove the brake pedal from the vehicle.

Installation

Installation procedure is the reverse of removal, except for the following:
Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION
Replace all nylon-insert locknuts.

Verify the correct operation of the brake lights.