02/03/2020 13:50:14

Switches - Steering Wheel (Remove and Replace)

Correction Code 17300502

Removal

  1. Remove the driver's air bag (refer to procedure).
  2. Place the driver's air bag assembly on a soft clean surface with the backside of the bezel facing up.
  3. Unplug the harness connectors (x2) from the back of 1 of the switches.
  4. Remove the fasteners (x2) that secure the switch to the air bag assembly (torque 1.2 Nm).
  5. Disengage the switch retaining clips by carefully pushing the switch up through the back of the bezel.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Take care not to damage component(s).
  6. Remove the switch from the bezel.
  7. Repeat steps 3 through 6 on the other steering wheel switch.

Installation

  1. Installation procedure is the reverse of removal.