2026-08-09

Headliner - Panoramic Roof (Remove and Install)

Correction Code 15202001

Note
This procedure does not remove the headliner from vehicle; the headliner remains inside the vehicle cabin supported by the tops of the seats.

Removal

  1. Remove the LH A-pillar trim (refer to procedure).
  2. Remove the RH A-pillar trim.
  3. Release the LH upper B-pillar trim (refer to procedure).
  4. Release the RH upper B-pillar trim.
  5. Remove the LH C-pillar trim (refer to procedure).
  6. Remove the RH C-pillar trim.
  7. Remove the driver's sun visor (refer to procedure).
  8. Remove the passenger's sun visor.
  9. Carefully release the clips (x4) that secure the headliner center trim to the cross rail.
    CAUTION
    Take care not to damage component(s).
    CAUTION
    Replace any broken clips.
  10. 2nd generation panoramic roof only: Remove the fasteners (x3) that secure the metal bar to the roof frame.
  11. Remove the screws (x2) that secure the headliner to the roof frame or the metal bar, as applicable.
  12. Release the rear header clips (x5).
  13. Pull down on the rear of the rear view mirror trim to release the trim.
  14. Carefully release the clips (x4) that secure the headliner to the front header.
    Note
    Components have been removed in this graphic to aid clarity.
  15. Lower the headliner onto the seats.
    CAUTION
    Do not bend or crease the headliner during removal.

Installation

  1. Installation procedure is the reverse of removal.