2026-08-19

Tire Rotation

Correction Code 34010105 (Mobile Technicians using jack stands use 34020105 instead.)

  • 2026-08-19: Added step to record the tread depth of each tire.
  • 2025-07-02: Correction code 10001105 is disabled. Updated mobile service note to, "(Mobile Technicians using jack stands use 34020105 instead.)"
Warning
Mobile Service Technicians: Only same-side (if front and rear tires are the same size) or same-axle rotations are permitted.
  1. Record the tread depth of each tire.
    Note
    Measure and record the outer, center, and inner tread depths. Do not set the tire tread gauge probe on the molded tread wear indicators. Recommend replacement if tread depth is 4/32 in (3 mm) or less.
  2. Remove all 4 wheels (refer to procedure).
  3. Reinstall the wheels according to the correct rotation pattern for the type of tire (refer to General Information > Best Practices > Wheels and Tires ).