02/03/2020 13:50:14

Light - Fog/Reverse - Rear - LH (Remove and Replace)

Correction Code 17402702

Removal

  1. Remove the liftgate applique (refer to procedure).
  2. Remove the tailgate lower finisher (refer to procedure).
  3. Release the watershield for access to the fog/reverse light.
    Informational PurposesAn informational icon, calling your attention
    Note
    A new watershield might be required if the adhesive is unable to secure it in position during reinstallation.
  4. Disconnect the fog/reverse light connector.
  5. Remove the nuts (x4) that attach the light assembly to the tailgate panel (torque 4 Nm).
  6. Remove the fog/reverse light assembly.

Installation

Installation procedure is the reverse of removal, except for the following:
Warning IconA warning icon, calling your attention to a possibly risky situation
CAUTION
Make sure that the foam gasket is completely flush with the fog/reverse light before installing.
  • When attaching the light to the tailgate panel, install the nuts in the order shown (torque 4 Nm).