02/03/2020 13:50:14

Reservoir - Master Cylinder (Remove and Replace)

Correction Code 33170802

Removal

  1. Remove the master cylinder and reservoir assembly (refer to procedure).
  2. Release the reservoir to master cylinder fixing lugs (x4).
  3. Release the reservoir from the master cylinder connections (x2).
    Informational PurposesAn informational icon, calling your attention
    Note
    Place suitable absorbent material around the affected area to absorb any possible fluid spillage.
  4. Remove and discard the seals (x2) from the master cylinder.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Replace the master cylinder seals.

Installation

Installation procedure is the reverse of removal, except for the following:
Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
Only use cleaning agents and solvents in a well-ventilated area.
Informational PurposesAn informational icon, calling your attention
Note
Clean the affected areas before installation.
  1. Bleed the brakes (refer to procedure).