29/05/2024 14:39:13

Bolster - Side - Seat - 2nd Row - LH (Remove and Replace)

Correction Code 13055102

  • 2024-05-29: Added information on releasing the bolster from the mounting grommets. Provide upper grommet PN in case replacement is needed.

Removal

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
The retaining clips may become dislodged when performing this procedure. Wear eye protection to avoid personal injury.
  1. Fully open the LH rear door.
  2. Release the LH rear seat back rest lock and push the rear seat back rest flat for access.
  3. Insert a wedge tool or inflatable airbag behind the bolster to provide outward pressure.
  4. Use a long screwdriver or long pliers to disengage the upper grommet.
    Tip: The opening of the grommet points toward the front of the vehicle, therefore the bolster should be pried/pulled towards the front of the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    This grommet is near the top end of the bolster and might require extra effort to remove.
    Informational PurposesAn informational icon, calling your attention
    Note
    If it was difficult to release the bolster from this grommet, replacement of the grommet is recommended (1016824-00-A).
  5. Release the seat side bolster from the upper grommet.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Avoid applying excessive forces on the bolster assembly. This might bend the bolster structure, permanently damaging the bolster.
  6. Repeat steps 4-5 on the lower grommets.
    Tip: Pull upwards to remove the bolster from the 2x lower grommets.
  7. Remove the seat side bolster.

Installation

Installation procedure is the reverse of removal.