02/03/2020 13:50:14

Bracket - Vacuum Pump (Remove and Replace)

Correction Code 33032202

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
If the vehicle has air suspension, activate "Jack" mode on the touchscreen before raising and supporting the vehicle.

Removal

  1. Remove the front skid plate (refer to procedure).
  2. Remove the bolts (x2) that secure the vacuum pump mounting bracket to the front bumper carrier (torque 6 Nm).
  3. Lower the vehicle.
  4. Remove the vacuum pump (refer to procedure).
  5. Remove the bolts (x2) that secure the vacuum pump mounting bracket to the front subframe (torque 6 Nm).
    Informational PurposesAn informational icon, calling your attention
    Note
    Image shown with the vacuum pump installed.
  6. Remove the vacuum pump mounting bracket from the vehicle.

Installation

Installation procedure is the reverse of removal.