09/12/2024 19:13:50

Module - HomeLink Bracket (Rework)

Correction Code 17159455

Rework

  1. Position homelink bracket onto bumper assembly.
    Informational PurposesAn informational icon, calling your attention
    Note
    Insert the inner screw securing homelink bracket onto bumper assembly to support with homelink bracket alignment, homelink bracket mount is located on the top right side of bumper assembly.
  2. Use a automatic center punch to make the hole location on bumper assembly.
  3. Drill a 8.5 mm hole at marked location on bumper assembly.
  4. Clean the surface of reworked area.
  5. Install riv-nut to bumper assembly.
  6. Install homelink bracket onto bumper assembly.
  7. Locate the pre-existing holes for front radar bracket.
  8. Use a drill to enlarge the holes to 8.5 mm.
  9. Clean the surface of reworked area.
  10. Install riv-nuts to bumper assembly.
  11. Install front radar bracket onto bumper assembly.