2026-08-09

Antenna Amplifier - FM2/Satellite/DAB (Remove and Replace)

Correction Code 21300702

Removal

  1. Remove the RH liftgate trim (refer to procedure).
  2. Remove the screw that secures the amplifier to the liftgate (torque 1.2 Nm).
  3. Carefully disconnect the amplifier connector.
    Note
    The second connector is for EU markets only.
  4. Release the clip that secures the amplifier to the liftgate.
  5. Carefully release the antenna lead from the liftgate glass and then remove the antenna.

Installation

Installation procedure is the reverse of removal, except for the following:
  1. Replace the adhesive strip if necessary.
    Note
    Clean the affected areas before installation.
    CAUTION
    Apply contact adhesive to mating faces if bond has been broken.
  2. Ensure all contacts are clean and bond to the surface mounted antenna.
    Note
    Listen for an audible click when connecting harness connectors.