26/07/2023 17:02:15

Panoramic Roof - Adjust

Correction Code 24100110

Adjust

  1. Remove the panoramic roof glass (refer to procedure).
  2. Measure the distance between the moving glass moving links.
  3. Measure the distance between the mounting tabs on the moving glass.
  4. Make sure that the outside distance between the tabs on the moving glass is the same as the outside distance measured between the mounting tabs on the vehicle. If necessary, bend the tabs on the moving glass to adjust the distance.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Be careful not to damage components.

Install

  1. Install the panoramic roof glass (refer to procedure).
  2. Connect a laptop with Toolbox 3 to the vehicle. See Toolbox 3 (Connect and Disconnect).
  3. Unlock the vehicle gateway. See Gateway Unlock.
  4. In Toolbox 3, click the Actions tab, type "Sunroof-Calibrate" into the search field, click PROC_CID_X_SUNROOF-CALIBRATESearch for routine in ToolboxClosures / Sunroof - Calibrate Sunroof, click Run, and allow the routine to complete.
  5. Disconnect the laptop with Toolbox 3 from the vehicle. See Toolbox 3 (Connect and Disconnect).
  6. Operate the panoramic moving glass and make sure that the glass does not shudder while opening or closing.