2026-08-09

Antenna - GPS (Remove and Replace)

Correction Code 21320102

Removal

  1. Remove liftgate glazing. See Liftgate Glass (Remove and Install).
  2. Disconnect GPS harness connector.
  3. Release GPS antenna from adhesive bond.
  4. Release wiring harness from liftgate.
    Note
    Note installed position of components before removal.
  5. Remove GPS antenna.

Installation

  1. Installation procedure is the reverse of removal.
    Note
    Clean the affected areas before installation.
    Warning
    Only use cleaning agents and solvents in a well-ventilated area.