Personal Protection

Refer to the following chart for help in selecting the appropriate PPE (Personal Protective Equipment).

Note
The illustrations below are for demonstration purposes only. This is not an exhaustive list. Make sure the PPE is within expiration date and is proper before use. For detailed information about specific PPE, please contact the local EHS team.
CAUTION
Always wear safety glasses and safety toe shoes when in a service or collision shop.
Body PPE Name Applicable Scenes Illustration
Feet

Safety Toe Shoes

Always wear when in a service or collision shop.
Eyes and Face

Safety Glasses

Always wear when in a service or collision shop.

Chemical Splash Goggles

Always wear when handling chemicals or performing painting operations.

Face Shield

Always wear when performing cutting and polishing operations, handling chemicals or working with pressurized gasses, e.g. in A/C components.

Welding Helmet

Always wear when performing welding operations.
Head

Bump Cap

Always wear when inspecting or performing service operations under the vehicle.
Ears

Protective Earplugs/ Earmuffs

Always wear during removal/installation, check, or service operations when noise is 80 dB or above.
Respiratory System

Purifying Respirator

Always wear when performing cutting, drilling, polishing and paint preparation activities.

Supplied Air Respirator

Always wear when performing painting operations.
Hands

Cut-resistant Gloves

Always wear during removal/installation, checking or repairing metal sharp parts, glass work.
Figure 1. Regular cut-resistant gloves
Figure 2. Impact and cut protection gloves

High Voltage Electrical Gloves with Leather Glove Protectors

Always wear during interactions where high voltage may be present (for example, remove/install high voltage components, take electrical measurements).

Nitrile Gloves

Always wear when handling chemicals or waste.

Welding Gloves

Always wear when performing sheet metal welding operations.

Cryogenic Gloves

Always wear when working with pressurized gasses, e.g. in A/C components.
Body

Cover

Always wear during removal/installation, check or service operations.

High Visibility Vest

Always wear during periods of low lighting, especially in parking lots.

Hooded one-piece Protective Suit

Always wear during painting and paint preparation operations.

Welding Work Clothes

Always wear when performing welding operations.