02/03/2020 13:50:14

Horn - (Remove and Replace)

Correction Code 17530102 Correction Code 17530702 Correction Code 17530702

Choose the appropriate procedure based on the vehicle's configuration and date of manufacture:

1st Generation

Correction Code 17530102

  1. Remove the front underhood apron (refer to procedure).
  2. Remove the bolt that secures the horn to the bracket (torque 8 Nm).
  3. Move the connector covers aside and disconnect the horn connectors (x2).
  4. Remove the horn from the vehicle.

2nd Generation (through April 10, 2016)

Correction Code 17530702

  1. Remove the underhood storage unit (refer to procedure).
  2. Remove the ankle catcher (refer to procedure).
  3. Remove the bolts (x2) and clips (x16) that secure the radiator shroud, but do not remove the radiator shroud at this time.
  4. Disconnect the front radar connector, and set it aside.
  5. Disconnect the exterior air temperature sensor, and set it aside.
  6. Remove the radiator shroud.
  7. Release the bolt that secures the horn bracket to the active center louver assembly (torque 5 Nm).
    Informational PurposesAn informational icon, calling your attention
    Note
    Do not release the nut that secure the horn to the bracket.
  8. While tilting the radiator forward, remove the horn and bracket by maneuvering them out through the circular hole in the radiator duct assembly.

2nd Generation (after April 10, 2016)

Correction Code 17530702

  1. Remove the underhood storage unit (refer to procedure).
  2. Remove the front fascia (refer to procedure).
  3. Remove the bolts (x2) and clips (x16) that secure the radiator shroud, but do not remove the radiator shroud at this time.
  4. Disconnect the exterior air temperature sensor, and set it aside.
  5. Remove the radiator shroud.
  6. Release the bolt that secures the horn bracket to the active center louver assembly (torque 5 Nm).
    Informational PurposesAn informational icon, calling your attention
    Note
    Do not release the nut that secure the horn to the bracket.
  7. While tilting the radiator forward, remove the horn and bracket by maneuvering them out through the circular hole in the radiator duct assembly.

Installation

  1. Installation procedure is the reverse of removal.