20/01/2023 10:34:13

3 Way Coolant Valve - Radiator Bypass (Remove and Replace)

Correction Code 18306102

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
If the 12V power supply is disconnected, do not attempt to open any doors with door glass in closed position. Failure to follow this instruction could result in door glass shatter.
Informational PurposesAn informational icon, calling your attention
Note
Before disconnecting the 12V power supply, ensure that the driver’s door window is fully open. Failure to follow this instruction could result in vehicle lockout.

Removal

  1. Raise and support the vehicle (refer to procedure).
  2. Disconnect 12V power. See Disconnect 12V Power .
  3. Remove the underhood storage unit for access (refer to procedure).
  4. Position a container to collect the coolant.
  5. Clamp the feed and return coolant hoses (x3).
  6. Release the clips (x3) that secure the coolant hoses to the coolant valve. Release the hoses from the valve.
  7. Remove the RH front lower wheel arch liner. Refer to the LH front lower wheel arch liner (refer to procedure).
  8. Disconnect the coolant valve connector.
  9. Remove the bolts (x2) that secure the coolant valve to the bracket (torque 5 Nm).
  10. Remove the coolant valve.

Installation

  1. Installation procedure is the reverse of removal, except for the following:
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    Only use cleaning agents and solvents in a well-ventilated area.
    Informational PurposesAn informational icon, calling your attention
    Note
    Clean the affected areas before installation.
  2. Refill and bleed the cooling system (refer to procedure).