校正代码 62100100905 FRT 0.10 注意：除非本程序中另有明确规定，否则上文所列校正代码及相关 FRT 反映的是执行本程序（包括关联程序）所需的所有工作。除非明确要求，否则请勿堆叠校正代码。 注意：请参阅平均维修工时深入了解 FRT 及其创建方式。 注意：请参阅人员保护确保在执行以下程序时穿戴适当的个人防护装备 (PPE)。 注意：请参阅人体工程学注意事项查看安全健康的作业规程。

1. 运行 ODIN 例行程序 TEST-SELF_VCLEFT_X_WIPERvia Service Mode:Closures ➜ Windows ➜ Wiper Testvia Toolbox:(link)
2. On the vehicle touchscreen, select Service Mode > Driver Assist > Cameras > Grid Button (in lower corner of camera preview) > Clean Cameras. Verify that the camera cleaning system works as expected and that the air stream clears previously dispensed fluid. Record the results in SCA.
   注

   **Via Service mode>Driver Assist>Cameras>Grid button on lower left>Clean cameras, Ensure air stream clears previously dispensed fluid as expected, Record results in SCA
3. Open the hood.
4. Fill the washer fluid reservoir.
5. Close the hood.