2026-08-09

支架 - C 柱 - 左侧(拆卸和更换)

校正代码 15186402 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See 人员保护 to make sure wearing proper PPE when performing the below procedure. NOTE: See for safe and healthy working practices.

拆卸

  1. 松开将 C 柱 LH 上部饰板固定到车辆的夹子并放在一旁,但不要将饰板与安全带分离。请参阅饰板 - C 柱 - 上 - 左侧(拆卸和更换)。
  2. 从 LH C 柱支架松开线束夹子。
  3. 松开将 LH C 柱支架固定到车辆的夹子 (x3),然后从车上小心地拔下支架。
    注
    支架仍固定在充电端口的手动开锁缆索上。
  4. 从 LH C 柱支架上松开充电端口手动释放管,然后从车上拆下支架。

安装

  1. 将 LH C 柱支架安装在车辆上,然后将充电端口手动释放管安装到支架上。
  2. 安装将 LH C 柱支架固定到车辆的夹子 (x3)。
  3. 将线束夹安装到 LH C 柱支架上。
  4. 安装 LH C 柱饰板。请参阅饰板 - C 柱 - 上 - 左侧(拆卸和更换)。