2026-08-09

摄像头 - 内部（拆卸和更换）

校正代码 17241602 0.12 注意：除非本程序中另有明确规定，否则上文所列校正代码及相关 FRT 反映的是执行本程序（包括关联程序）所需的所有工作。除非明确要求，否则请勿堆叠校正代码。 注意：请参阅平均维修工时深入了解 FRT 及其创建方式。 注意：执行下述程序时，请参阅人员保护确认已穿戴适当的个人防护装备 (PPE)。

  • 2026-06-02: Updated camera routines.
  • 2024-11-01: Added note that Service Mode must be enabled prior to connecting the replacement camera.
  • 2023-12-21: Fixed errors.

安装

  1. Enable Service Mode. See 维护模式（启用和禁用）.
    警告
    To prevent potential damage to the replacement camera, Service Mode must be enabled prior to connecting the camera.
  2. Install the upper camera cover. See 上盖 - 后视镜（拆卸和更换）.
  3. For HW4 cameras:
    1. Unlock the vehicle gateway. See 网关（解锁）.
    2. On the touchscreen, tap the Service Mode "wrench" (at the bottom of the touchscreen UI), and then tap Driver Assist > Cameras > Update Camera, select INTERIOR in the drop list, click Run, and allow the routine to complete.
    3. Exit Service Mode. See 维护模式（启用和禁用）.
  4. Raise the LH front window and close the LH front door.