2025-08-06

Rear Header Upper

Correction code: 10400100202 NOTE: Unless explicitly stated in the procedure, the above correction code includes all Collision Repair and Service repair work required to perform this procedure, including the linked Collision Repair procedures and linked Service procedures. Do not stack Collision Repair correction codes unless explicitly told to do so. Depending on the damage to the vehicle, additional repairs may be required.

Repair Information

Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
This procedure can be completed without using a frame bench.

Parts List


Quantity	Description	Image / Notes
1	ASY RR HEADER (For vehicles built before April 3rd, 2018) ASY RR HEADER (For vehicles built on or after April 3rd, 2018)
31	SPR, 5x4.5	Tesla part number 1026938-00-A.
12	SPR, 5x7	Tesla part number 1026943-00-A.

When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.

Repair Procedure

Remove the original component.
or Factory Spot Welds
Prepare for installation.
or SPRs, 5x4.5
Note
The following Tesla SPR die is required to install this SPR: SM 085 0125.

or SPRs, 5x7

Note
The following Tesla SPR die is required to install this SPR: SM 085 0125.
Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.

Note
Apply structural foam (circled in red).
Install the new component or components.
Perform any necessary post-repair operations.