B-Pillar Reinforcement
Correction code:
10100112802
10100112902
NOTE:
Unless explicitly stated in the procedure, the above
correction code includes all Collision Repair and Service
repair work required to perform this procedure, including
the linked Collision Repair procedures and linked Service
procedures. Do not stack Collision Repair correction
codes unless explicitly told to do so. Depending
on the damage to the vehicle, additional repairs may be
required.
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | REINFORCEMENT, B-PILLAR SILL (B-Pillar to Sill Reinforcement) | |
| 8 | Bolt, hex-head | Tesla part number 1021165-00-A. |
| 1 | Nut | Tesla part number 2007207. |
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
-
Remove the original component.
-
Prepare for installation.
-
Install the new component or components.
Torque the fasteners to 10 Nm.NoteThese components are secured with fasteners and no structural adhesive is required.
- Perform any necessary post-repair operations.