2025-08-06

Rear Node Outer Reinforcement

Correction code: 10101807002 10101819302 NOTE: Unless explicitly stated in the procedure, the above correction code includes all Collision Repair and Service repair work required to perform this procedure, including the linked Collision Repair procedures and linked Service procedures. Do not stack Collision Repair correction codes unless explicitly told to do so. Depending on the damage to the vehicle, additional repairs may be required.

Repair Information

Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
This procedure can be completed without using a frame bench.

Parts List


Quantity	Description	Image / Notes
1	REINF- REAR NODE OUTER (Rear Node Outer Reinforcement)
7	Bolt, hex-head , M8-1.25x20	Tesla part number 1007580-00-A.
1	Bolt, Torx-head , M8-1.25x20	Tesla part number 1014747-00-B.
4	Bolt, Torx-head M8 x 1.25 x 16 PAN FLANGE HEAD 6-LOBE DRIVE	Tesla part number 1008833-01-A.
4	Nut	Tesla part number 2007088.

When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.

Repair Procedure

Remove the original component.
or Factory Spot Welds
or Bolts, hex-head

Bolt, Torx-head
Prepare for installation.

Note
A red X indicates a location where a factory-installed fastener is not being replaced.

or Bolts, hex-head

or Bolt, Torx-head

Nut
Apply structural adhesive to the mating surfaces on the vehicle and the new component or components.
Install the new component or components.
Torque the bolts and nuts to 25 Nm.

Note
Apply heavy-duty threadlocker to the threads of the new M8-1.25x16 bolts.
Perform any necessary post-repair operations.