A-Pillar Reinforcement Assembly
Correction code:
10100128002
10100128102
NOTE:
Unless explicitly stated in the procedure, the above
correction code includes all Collision Repair and Service
repair work required to perform this procedure, including
the linked Collision Repair procedures and linked Service
procedures. Do not stack Collision Repair correction
codes unless explicitly told to do so. Depending
on the damage to the vehicle, additional repairs may be
required.
Repair Information
- Review all collision repair general practices and safety documentation and wear the appropriate PPE (Personal Protective Equipment) before beginning this procedure.
- This procedure can be completed without using a frame bench.
Parts List
| Quantity | Description | Image / Notes |
|---|---|---|
| 1 | ASY-REINF A PILLAR (A-Pillar Reinforcement) | |
| 3 | Bolt, hex-head ,HF,M6X18 | Tesla part number 1006529-00-A. |
| 1 | Stud, DOUBLE ENDED STUD,HF,M8x25+M8x15 | Tesla part number 1060709-00-B. |
When ordering parts, refer to the Parts Catalog and enter the VIN of the vehicle being repaired to find the correct parts (and the part numbers) for the vehicle. Alternatively, use the search function in the Parts Catalog to find a specific part for the vehicle.
Repair Procedure
-
Remove the necessary portion
of the Body Side Outer to expose
the underlying component being replaced.
-
Remove the original component.
or Bolts, hex-head
Stud
-
Prepare for installation.
Stud
-
Install the new component or components.
Torque the fasteners as follows:
- M6X18 bolts, part number 1006529-00-A: 10 Nm.
- M8x25+M8x15 double-ended studs, part number 1060709-00-B: 10 Nm.
-
Install the portion of the
Body Side Outer that was
removed to expose the component being replaced.
- Perform any necessary post-repair operations.